Cute Christmas tree with shoes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A scalable Christmas tree with shoes and a cute face because everything is better with some feet
- Rating
- 4.951 / 5
- Likes
- 2,253
- Downloads
- 8,745
- Makes
- 199
- Views
- 29,075
- Reviews
- 163
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
This is a scalable Christmas tree with shoes because everything is better with some shoes and a face XD. The first tree is at scale 75% the middle is at 100% and the right one is at 50%. You can go bigger if you want.
note that the smaller you go the harder it is to get the shoes in. At the scale of 50% you have to push a bit harder than the one on 100%.
3D PRINTING:
You can print this with a layer height of 0.2 (for the 50% tree and the shoes) or 0.3mm. You don’t need supports.
I would recommend dropping the shoes 1mm lower in the slicer as the shoes are a bit too round in the front. I printed them with 15-20% infill (trees and shoes).
If you read this in December, Happy Christmas!
I borrowed the shoes from @FatherLicorice and his cute little ghosts.