Datsun 240z Rally rims for 1/10 scale rc car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Datsun 240Z style rims for every 1/10 scale model car with a 12 mm hex adapter. Any standard 1/10 scale tire should fit.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 1025
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi everyone,
i recently finished a 1/10 scale rally car with a Datsun 240Z Rally design body from Tamiya. But i just couldn't find matching rims.
So i made some myself and would like to share them. These are made to look like the Datsun rims and are by no means a perfect copy. Sorry, was too lazy for that. :)
To get a good and stable print result, you need to switch on supports on build plane, add 4 perimeters and 4 top/bottom layers and an infill of 15% or more. 15% worked fine for me.
I used a 0.4 mm nozzle with a layer height of 0.2 mm but if you want finer details you could also use 0.15 mm.
I hope you will enjoy them as much as i do!
Happy RC racing!