F1 rear wing with moving DRS flap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of a F1 style rear wing with a working DRS flap
- Ocena
- 5 / 5
- Polubienia
- 114
- Pobrania
- 1383
- Wydruki
- 1
- Wyświetlenia
- 9529
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This model is a F1 2022 style rear wing with a movable DRS flap. It's a great model for anyone interested in Formula 1.
Printing
i printed everything in a 0.2 resolution and 3 walls. Infill isn't relevant except for the base. The only part that needs supports is the DRS frame. I reccommend using a raft for the flap and printing it with a wide slim side in the bed.
The goose neck needs to be printed twice, once normally and once mirrored.
I printed the base with a fuzzy skin because I liked the look, but it obviously isn't neccesary.
Assembly
Assembling the model is very simple, the large parts should click together. The switch and the rod can be connected with some metal wire. Put the switch and the rod into the gooseneck before glueing it together.