1 / 2
Case for Seeed Dual Gigabit Ethernet NICs Carrier Board for Raspberry Pi Compute Module 4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case for the Seeed dual gigabit ethernet nic board with room for a heat sink.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 838
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Simple case for the Seeed dual gigabit ethernet nic board with room for a heat sink.
Parts needed:
- 4 threaded m4 inserts
- 4 m4*12 screws
Print instructions:
- 0.4mm nozzle
- 0.2 layer height
- Support on build plate only for the top part.