GPIO Cover (For official Pi Zero case)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple bottom GPIO cover for the official Raspberry Pi Zero case. It has a small brim that prevents it from…
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 263
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple bottom GPIO cover for the official Raspberry Pi Zero case. It has a small brim that prevents it from falling out of the Pi Zero case. Should prevent any accidental shorting if you don't need bottom GPIO access.
I've added a version with a recess so it can be used if you fit a GPIO header. Space is tight so I had to use a soldering iron to melt a small lead in.
Print Settings
Printer:
Prusa i2
Rafts:
No
Supports:
No
Resolution:
0.25 mm layaer
Infill:
15%
Post-Printing
Just insert the cover from the inside of the Pi Zero case, the insert the Pi Zero and pop on the lid of your choice.
How I Designed This
I Simply measured the slot with some digital calipers.
Category: Electronics