The Nobody that Saved the World
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small relief print of Nobody, star of Nobody Saves the World. I am a big fan of this game!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
I made this relief as a momento for 100%ing the game and thought I would share. The print pictured uses a 0.15 mm layer height and resulted in a filament switch on layer 33*. If you want it to look right, you have to use 100% infill, as I could not figure out how to keep the body of Nobody white when you switch to black while also having enough top layers. I just did a couple skirt lines on the outside to prime the nozzle. I had some layer adhesion issues in the corner that I don't understand, but I think that is more on my printer. Gcode is attached as a .txt file, as Printables didn't like one of the commands in it. Printed on an Anycubic Kobra Go.
*I used this guide to setup the filament change: https://all3dp.com/2/ender-3-change-filament-mid-print/