The Nobody that Saved the World
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small relief print of Nobody, star of Nobody Saves the World. I am a big fan of this game!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
I made this relief as a momento for 100%ing the game and thought I would share. The print pictured uses a 0.15 mm layer height and resulted in a filament switch on layer 33*. If you want it to look right, you have to use 100% infill, as I could not figure out how to keep the body of Nobody white when you switch to black while also having enough top layers. I just did a couple skirt lines on the outside to prime the nozzle. I had some layer adhesion issues in the corner that I don't understand, but I think that is more on my printer. Gcode is attached as a .txt file, as Printables didn't like one of the commands in it. Printed on an Anycubic Kobra Go.
*I used this guide to setup the filament change: https://all3dp.com/2/ender-3-change-filament-mid-print/