Detroit Red Wings Logo (No MMU)

This is a remix of Tymyn_3D's Detroit Red Wings Logo Multimaterial as an option to print without an MMU. If you have an MMU, please see their original model!

My color change gcodes and 3mf files are attached. If you are not interested in the color change, just pull the stl file to your workspace and you are good to go!

The 100% scale no hole version is a 7 inch diameter with 2mm white thickness and 0.8mm red thickness. This can be scaled however you want. This version is perfect for a display stand or wall art!

The 100% scale holed version is a 90mm diameter with 1mm white thickness and 0.4mm red thickness. This can also be scaled as needed. This version is perfect for an ornament for your tree, earrings, or any other way of hanging!

Color Change Tips: 

• You may already know this, but you are able to print PETG onto PLA and vice versa (PLA onto PETG). In my cover picture, white is PLA and red is PETG.
• Make sure that you adjust your nozzle temperature accordingly with the material of the second color. If there is no material type change, no issue! If you do switch from PLA to PETG or vice versa, pause the print after confirming the color change on the LCD screen and then either raise or lower the nozzle temp. It will bring to temp before resuming print. 
• Keep your bed temperature at whatever is best for the bottom-most material. If you started with PLA, keep around the 60C the print began with. If you started with PETG, keep around the 85C the print began with. 
• If you are printing with any other materials and not sure… I'm not either! Should be okay and follow similar steps just make sure online!