1 / 1
South Bend 9 - 3-jaw chuck jaw biaser for grinding ID — zdjęcie 1

South Bend 9 - 3-jaw chuck jaw biaser for grinding ID

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use this plate to clamp your 3-jaw chuck jaws inwards for ID grinding using a Dremel tool in your toolpost.

Ocena
0 / 5
Polubienia
7
Pobrania
48
Wydruki
0
Wyświetlenia
634
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This plate will allow you to bias your 3-jaw chuck jaws inwards to hold them in the proper biased position for ID grinding.  I was able to true my chuck ID using a Dremel on my AXA-style toolpost and achieved 0.001-0.002" of runout verified with a gauge pin and dial indicator.

 

 

Tagi