Tap and Die Organiser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tap and Die Organizer Tray for Mastercraft Tap and Die Set. If you have this set, you may have had the stock tray…
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 205
- Wydruki
- 0
- Wyświetlenia
- 1984
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Tap and Die Organizer Tray for Mastercraft Tap and Die Set.
If you have this set, you may have had the stock tray crumble over time. This will fix that. I put some foam on the lid to hold the tools in place.
I printed the lettering by putting in a stop command after the blue was finished and changing to white.
For my printer bed size I had to cut it into 6 pieces, but I have also included the Full Tray for someone who wants to cut it up differently, or has the capacity to print it whole.
Printed in PLA at .2mm height.
UPDATE: Added Upper Left tray with a spot for spare taps, etc.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Clone
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
15%
How I Designed This
Designed in Fusion 360
Category: Tool Holders & Boxes