AP Racing Brakes extruder visualizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Distinct visualizer design for motor lovers
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 147
- Wydruki
- 0
- Wyświetlenia
- 1042
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Do you like print like in a race? Then you will need a good brake (just joking).
How to print it?
- Can be printed with 0.4mm or 0.25mm nozzle, I recommend to use the 0.25mm in order to increase the quality of the letters on the brake calipers.
- There is no need to use MMU because the color change is made by different heights.
- I recommend to use the 3mf so all the color changes and supports are already defined, just slice, print and enjoy
What you will need to make this marvelous extruder visualizer?
- 1x Magnet 4x8mm
- A little bit of super glue
How to assemble it?
- Glue together the brake calipers and fit them in the mount aligning the two holes, you can use a little piece of filament to fit them together. See the photos.
I took the mount from here https://www.printables.com/es/model/189922-the-real-bondtech-gears-visualizer and modified to fit the calipers.
Hope you like it!