AP Racing Brakes extruder visualizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Distinct visualizer design for motor lovers
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 147
- Makes
- 0
- Views
- 1,044
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Do you like print like in a race? Then you will need a good brake (just joking).
How to print it?
- Can be printed with 0.4mm or 0.25mm nozzle, I recommend to use the 0.25mm in order to increase the quality of the letters on the brake calipers.
- There is no need to use MMU because the color change is made by different heights.
- I recommend to use the 3mf so all the color changes and supports are already defined, just slice, print and enjoy
What you will need to make this marvelous extruder visualizer?
- 1x Magnet 4x8mm
- A little bit of super glue
How to assemble it?
- Glue together the brake calipers and fit them in the mount aligning the two holes, you can use a little piece of filament to fit them together. See the photos.
I took the mount from here https://www.printables.com/es/model/189922-the-real-bondtech-gears-visualizer and modified to fit the calipers.
Hope you like it!