Higher Feed Brackets for Original Prusa Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The ugly ferrite disappears!!! Feed Brackets in different sizes for more space under the Enclosure
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 138
- Wydruki
- 2
- Wyświetlenia
- 1109
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have created three new versions with which you get a little more space under the case to make room for extensions etc.
There are three versions that are +2mm, +6mm and +8mm higher than the original.
Update:
08.01.23 > Added modified versions for the External PSU XP Power model VEC65US24 so the ugly ferrite near the connector can be stored under the Enclosure an all Looks nice :-) (I used the +6 Version i dont know yet if the +2 Version will do the Job)
Material
- +2mm > 8 screw M3 x 14mm
- +6mm > 8 screw M3 x 18mm
- +8mm > 8 screw M3 x 20mm
- 8 hexagon nuts M3
You like my Work?
Check out my other Enclosure Addons
Support my efforts and push the like ❤
Make my day and post yout Makes
Print instructions
Simple print
No support needed
PETG or PLA on 0.20mm, 15% Infill and 2 Parameters of course with original Prusament!
Happy Printing!!!