Endcaps and wire guides for LED light bars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a set of right and left endcaps for the LED light strip bars, They go with the AO-10x / Mendelmax bracket set that I designed, but may also fit Flurin's brackets potentially.
Uploaded a 5mm wider mount and 8mm longer endcap module as well, for additional wire room. You can mix and match those components as needed
Print instructions
Category: 3D Printer Parts Summary
This is a set of right and left endcaps for the LED light strip bars, They go with the AO-10x / Mendelmax bracket set that I designed, but may also fit Flurin's brackets potentially.
Uploaded a 5mm wider mount and 8mm longer endcap module as well, for additional wire room. You can mix and match those components as needed
Instructions
Print out 2 of the Endcap_b parts, and one set of the Right and left side pieces. Drill a hole in the end of one of the endcap B parts, and fit that over the end of your LED strip that has your connection wires. Now fit that part into one of the right or left side pieces, and thread the wire back towards your 20mm extrusion in the provided channel. I may also upload a thicker version of this for larger diameter wires here in a bit. You do not need to drill out the other side, as it is mainly decorative.