Ultimate Voxelab Aquila Y-axis PI camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Y axis PI camera mount for Voxelab Aquila, believe most versions of Aquila are covered now
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A bit of a major remix here, this started with trying to find a Y axis PI camera mount for my Voxelab Aquila and the mount by daaar https://www.thingiverse.com/thing:4973033 was what fit my needs (unfortunately it wont let me put this in the remix source area)
then I decided to make sure that night vision both with and without IR-cut as well as regular pi cam cases were able to be used.
There are 3 spacers center to center lengths of 19mm, 25.5mm and 31.75mm to get your camera to the height and or angle you want.
Update 5-26-2023: added new mounts that are for the D1/S2 as well as 3 different extended options
Update 11-8-2022: added a new extended night cam back plate as a number of these come with heatsinks that wont allow the regular back to fit. this also has some vent holes for the heatsinks
Category: 3D Printer Accessories