Ultimate Voxelab Aquila Y-axis PI camera
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Y axis PI camera mount for Voxelab Aquila, believe most versions of Aquila are covered now
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 57
- Makes
- 1
- Views
- 487
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
A bit of a major remix here, this started with trying to find a Y axis PI camera mount for my Voxelab Aquila and the mount by daaar https://www.thingiverse.com/thing:4973033 was what fit my needs (unfortunately it wont let me put this in the remix source area)
then I decided to make sure that night vision both with and without IR-cut as well as regular pi cam cases were able to be used.
There are 3 spacers center to center lengths of 19mm, 25.5mm and 31.75mm to get your camera to the height and or angle you want.
Update 5-26-2023: added new mounts that are for the D1/S2 as well as 3 different extended options
Update 11-8-2022: added a new extended night cam back plate as a number of these come with heatsinks that wont allow the regular back to fit. this also has some vent holes for the heatsinks
Category: 3D Printer Accessories