Spider Chuck for lathe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update_20220512 I made another version REV_A, where you can adjust the measure by small spacers tightened on spider…
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 1222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Update_20220512
I made another version REV_A, where you can adjust the measure by small spacers tightened on spider chuck, in this way you can avoid to print all the spider chucks.
Pay attention because you have to print the parts and to drown a M3 nuts on the spacers and on spider chuck.
In any case the old version remains available.
Regards
Jonweb
Hello,
just another tool chuck magnetic spider for my 100 mm lathe, i attached .stl with different height 10-12,5 15 mm.
It is a tools in order to help the lathe worker to lock small spieces on chuck, the parts will be in contact on the spider centre and help you to align it, In addition if you are more parts to machine is very suitable. The tool is locked inside the jaws and by three magnetic cub of 8 mm is positioned on chuck surface.
The tool chuck magnetic spider is suitable on common 100 mm auto centre chuck, the chuck jaws tickness is 15mm i addes 0,1 mm of gap.
If you wants other mesure please ask me
Regards
Jonweb
Print Settings
Resolution:
0,2
Infill:
65%
Filament: not important PLA/PETG not important
Category: 3D Printing