Printable wall keyholder thingy for use with Steelcase T-slot cubicle slatwall walls
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small keyring holder that will fit into the Steelcase brand Cubicle slatwall.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a small keyring holder that will fit into the Steelcase brand Cubicle slatwall. It is modeled loosely off their discontinued part, with several minor changes to make it a stronger print. You will need to print this with support. it should just socket in and latch though once its off the bed and trimmed.
Print instructions
Category: Office Summary
This is a small keyring holder that will fit into the Steelcase brand Cubicle slatwall. It is modeled loosely off their discontinued part, with several minor changes to make it a stronger print. You will need to print this with support. it should just socket in and latch though once its off the bed and trimmed.
Print Settings
Printer Brand: Lulzbot
Printer: Mini 2
Resolution: 0.5mm nozzle
Infill: as close to solid as you can get it if you have heavy keys
Filament: Push plastics ABS Black
Notes:
Pictures eventually likely.