1 / 2
Pegs for a hockey goal
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base for embedding a hockey goal in the ice
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 180
- Wydruki
- 1
- Wyświetlenia
- 1210
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (18)Powiązane
Base for a icehockey goal. Height 80mm, cylinder width 41mm. This item holds the hockey goal in place on the ice. Sharpened M10 bolts 40mm or longer are required to drive into the ice. I made a tight thread to make the connection strong.
I recommend printing with PTU. A model made of other materials (PET-G, ABS) cracked from the impact of the puck.
Resolution: 0.20mm
Infill: 100%
