1 / 2
Wet filament in comparison to dry filament - PMMA — zdjęcie 1
1 / 2

Wet filament in comparison to dry filament - PMMA

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I bought 50 gramm of PMMA for tests, but the results were worse. After drying the filament the results are as expected.

Ocena
0 / 5
Polubienia
4
Pobrania
32
Wydruki
0
Wyświetlenia
1828
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial

To print parts which looks like glass, I made some tests with PMMA (Mitsubishi 3Diakon - transparent - 1,75mm).

I bought the sample filament some month ago and stored it in the original package. Last week I opened the package and put the filament to my filament box to ensure filament stays dry.

The results of the printed parts were worse, although you should get high transparent parts using PMMA. Independent of the settings (layer heigt 0,1mm/0,2mm - high/low speed) I didn't get transparent parts. Due to the rough surface, I assumed the filament could be wet although I took it from the original package.

 

Drying of filament

According the data sheet of the vendor, the filament should be dried at a temperature between 70°C…80°C and for 6h…12h.

I dried the filament in a usual baking oven at a temperature of 77°C +/-3°C and a duration of 4 hours. I shortend the recommended time due to the low mass of the sample spool (50 gramm). To avoid temperatures over 80°C, I measured the temperature in the oven by a external thermometer.

 

Printing setup

Note: To print abrasive filament, I have changed the nozzle to a hardened steel nozzle. For the tests after drying I didn't change back to the previous nozzle. The effect of wet filament in comparison to dry filament is independent of the size and the material of the nozzle.

 

Results

After drying the filament, the printed parts looks as expected, also without grinding. In comparision to my previous tests with clear transparent PETG (clear-transparent PETG - print glass von H3dSprint | Kostenloses STL-Modell herunterladen | Printables.com), the first results with PMMA are promising to be able to print parts which looks like glass. The increased size of the nozzle (0,6mm instead of 0,4mm) seems to have a positive effect.

 

Tagi