1 / 1
Duck pond for wooden railway tracks
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a duck pond I designed for my daughter's wooden trains as a test print for my MMU2S.
- Ocena
- 4,5 / 5
- Polubienia
- 19
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 799
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 6)Remiksy (0)Kolekcje (57)Powiązane
This is a duck pond I designed for my daughter's wooden trains as a test print for my MMU2S. It is compatible with Brio, Big Jigs, Ikea track etc.
It is the length of a standard long straight.
Print instructions
4 Colours are required for the MMU2S
1 - Track Colour, e.g. black, brown, grey, silver
2 - Water - blue
3 - Lilypads - green
4 - Ducks, yellow
4 Perimeters for extra strength, 20% Gyroid Infill, 5 layers top, 4 layers bottom.
No supports.
PLA recommended.