Case for Deskpi Super 6c
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case for Deskpi Super6c pi cluster board
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 796
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Simple 1U case for the DeskPi Super6c cluster board.
Easy print. No supports required. Prints in any material. I printed in PLA.
Requires 8 small M3 heat-set inserts. Make sure they are 4mm or less in total diameter.
Designed to hold 3 40x20mm case fans. Noctua NF-A4x20s fit snugly enough to just use friction if you don't want to install the screws.
I did an acrylic laser-cut top for mine to replace the 3d printed top included in the model. The .step file is included below - its dead simple to extract a DXF of the top to import into Lightburn or other laser cut tools.
Lots of mistakes here. This was my first project done in f360 and I still have a lot to learn!