Dry cat food dispensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After the success of the water dish I wondered how a food dish could work with a Gatorade bottle. Well here it is. I…
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 722
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
After the success of the water dish I wondered how a food dish could work with a Gatorade
bottle. Well here it is.
I originally printed this on 12/14/2017, I found out right away that the size of the kibble I
had caused a log jam at the neck of the bottle. I then designed the pivot piece to hopefully
rectify the situation. After a few days the cats were able to figure it out and they are now
able to empty the bottle in about 3-4 days. Which is about how much I can fit in a 32oz
bottle based on what I was giving them on a daily bases.
After witnessing one of the cats head butt the bottle to make it tilt the other way and have
food dispense, I decided it was time to publish it. I suspect that smaller kibble will not
need the pivot piece.
01/09/2018 I just added the funnel for quick filling the bottle. It works well when pouring on to it, next refill I will test how it does scooping directly out of the bag. At 25% infill, this one seems plenty sturdy to do this.
04/22/18 I recently discovered that the 59.5oz bottle of Tropicana Orange Juice bottle fits the threads on this perfectly. More volume and seems to feed a bit better without any outside influence. Give it a try if you like.
Print Settings
Printer:
3up!
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2 mm
Infill:
20%
Notes:
This requires a build area of at least 175mm X 140mm.
If you need the pivot, print it with the curve facing upwards, this will of course require supports.
Category: Pets