Modified Gopro QU-BD Two Up mount for time lapse filming.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adhoc use of others work to make it possible to film time Lapse on a TWO UP by QU-BD and keeping the finished product…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Adhoc use of others work to make it possible to film time Lapse on a TWO UP by QU-BD and keeping the finished product in the same part of the frame. It also makes you able to turn the camera left and right. The connection doesn't totally mesh but it's workable.
Instructions
You may have to flip the STL 180 on the Y axis to print right. 100% infill was used at best quality I could do a(at the time(.2mm)) so the threads would work. Left the upper end open because my printer couldn't print the top side of the threads. Also clean it well, it is perfect fit on the Original equipment. I failed to clean mine at first for a test fit, and it broke the carriage. Cleaned the excess and it fits perfect now.
Category: 3D Printer Accessories