Window insert clips for portable air conditioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This screw clip is designed to attach a sheet of plastic (polycarbonat, PVC, plexiglass, wood) to your window, so you…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 814
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This screw clip is designed to attach a sheet of plastic (polycarbonat, PVC, plexiglass, wood) to your window, so you can most efficiently use a portable air conditioner unit.
Designed for:
22mm thick window frame and 10mm thick window cover
Instructions:use template for marking hole center for best fit
- drill 21-22mm holes in your window cover for the screw clips.
screw clips loosely in holes
- clips and nuts have markings for left and right
- initial position of the clip must be "clip-dot-is-near-to-the-frame"
- clips and nuts have markings for left and right
place window cover into window frame
tighten the nuts
- rotate clip with the screwdriver into "clip-dot-is-up" position
- nuts rotate in different directions
voila
- rotate clip with the screwdriver into "clip-dot-is-up" position
Print instructions
Category: Household Summary
This screw clip is designed to attach a sheet of plastic (polycarbonat, PVC, plexiglass, wood) to your window, so you can most efficiently use a portable air conditioner unit.
Designed for:
22mm thick window frame and 10mm thick window cover
Instructions:use template for marking hole center for best fit
- drill 21-22mm holes in your window cover for the screw clips.
screw clips loosely in holes
- clips and nuts have markings for left and right
- initial position of the clip must be "clip-dot-is-near-to-the-frame"
- clips and nuts have markings for left and right
place window cover into window frame
tighten the nuts
- rotate clip with the screwdriver into "clip-dot-is-up" position
- nuts rotate in different directions
voila
Print Settings
- rotate clip with the screwdriver into "clip-dot-is-up" position
Supports: No
Resolution: 0.3
Infill: 20%