Window insert clips for portable air conditioner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This screw clip is designed to attach a sheet of plastic (polycarbonat, PVC, plexiglass, wood) to your window, so you…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 82
- Makes
- 0
- Views
- 814
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This screw clip is designed to attach a sheet of plastic (polycarbonat, PVC, plexiglass, wood) to your window, so you can most efficiently use a portable air conditioner unit.
Designed for:
22mm thick window frame and 10mm thick window cover
Instructions:use template for marking hole center for best fit
- drill 21-22mm holes in your window cover for the screw clips.
screw clips loosely in holes
- clips and nuts have markings for left and right
- initial position of the clip must be "clip-dot-is-near-to-the-frame"
- clips and nuts have markings for left and right
place window cover into window frame
tighten the nuts
- rotate clip with the screwdriver into "clip-dot-is-up" position
- nuts rotate in different directions
voila
- rotate clip with the screwdriver into "clip-dot-is-up" position
Print instructions
Category: Household Summary
This screw clip is designed to attach a sheet of plastic (polycarbonat, PVC, plexiglass, wood) to your window, so you can most efficiently use a portable air conditioner unit.
Designed for:
22mm thick window frame and 10mm thick window cover
Instructions:use template for marking hole center for best fit
- drill 21-22mm holes in your window cover for the screw clips.
screw clips loosely in holes
- clips and nuts have markings for left and right
- initial position of the clip must be "clip-dot-is-near-to-the-frame"
- clips and nuts have markings for left and right
place window cover into window frame
tighten the nuts
- rotate clip with the screwdriver into "clip-dot-is-up" position
- nuts rotate in different directions
voila
Print Settings
- rotate clip with the screwdriver into "clip-dot-is-up" position
Supports: No
Resolution: 0.3
Infill: 20%