100 and 110 Degree Remixes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Because people seem to have trouble with the parent bracket causing too tight an angle, I loosened the angle..
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I'll leave this up here, but I now believe this other remix is a better solution to this issue.. I would try this instead: https://www.printables.com/model/338542-x1-ptfe-tube-guide-to-fix-loading-issues-best-of-b
This takes the parent design, but loosens the angle to either 100 or 110 degrees, to give slightly different fits, which ought to cause less of a binding issue for some people who found the parent too tight a bend. Note that this may cause your PTFE tube to hit up against the glass, however, depending on the length of your tube.
I printed these flat side down with a little bit of painted on support, as shown in the pic.