1 / 3
Bigfoot - Voron V0.1 bigger rubber feet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Less vibration and printer movements at high speed / accelerations.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 103
- Wydruki
- 3
- Wyświetlenia
- 1201
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (1)Kolekcje (54)Powiązane
Is V0.1 dancing on your desk and can you hear it from the next room? This mod will reduce it considerably.
This mod use Rubber Compressor Foot from the Voron Sourcing Guide.
Also you need M3x16 to mount power outlet.
This mod is inspired by 247zero BETA1, but in order not to interfere with the panels and to enclose the printer, I had to model everything from 0. This modification is only for Voron V0.1.
Based on the Voron-0 model from https://github.com/VoronDesign/Voron-0