Magnetic Dishwasher Clean/Dirty Slider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you keep forgetting whether the dishes in your dishwasher are clean? Use this magnetic slider.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 85
- Wydruki
- 1
- Wyświetlenia
- 579
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Do you keep forgetting whether the dishes in your dishwasher are clean? Use this magnetic slider.
Important: This print is a multicolor print, tho you don't need an MMU or a multi-nozzle printer. You can use this tutorial to learn how to print this model.
You need a 6*3mm magnet for this mode, also two 3*1mm magnets can be added but they're optional.
There are two sets of files, with ABS and PLA in their names, ABS files have a little more clearance to eliminate the filament shrinkage rate.
For printing the multicolor part, in your slicer, add all 3 multicolor files and place them on the center of your bed (make sure to select the correct face to be the first layer, use the slider model as a guide), then in the Y axis type -26.5 and 26.5. This way your parts will be in the right place (I hope I said it clearly enough, but if you need more help comment on the build or txt me on Telegram - @setPrints)