Magnetic Dishwasher Clean/Dirty Slider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Do you keep forgetting whether the dishes in your dishwasher are clean? Use this magnetic slider.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 85
- Makes
- 1
- Views
- 581
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Do you keep forgetting whether the dishes in your dishwasher are clean? Use this magnetic slider.
Important: This print is a multicolor print, tho you don't need an MMU or a multi-nozzle printer. You can use this tutorial to learn how to print this model.
You need a 6*3mm magnet for this mode, also two 3*1mm magnets can be added but they're optional.
There are two sets of files, with ABS and PLA in their names, ABS files have a little more clearance to eliminate the filament shrinkage rate.
For printing the multicolor part, in your slicer, add all 3 multicolor files and place them on the center of your bed (make sure to select the correct face to be the first layer, use the slider model as a guide), then in the Y axis type -26.5 and 26.5. This way your parts will be in the right place (I hope I said it clearly enough, but if you need more help comment on the build or txt me on Telegram - @setPrints)