Ring Security Keypad Wall Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remixed wall plate that I used to cover the existing hole that was left from taking off old keypads.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 966
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This was a remix I created to fit the hole configuration and size I needed. I had a previous security system that had very large keypads and I adjusted the sizing to cover up the existing hole from those keypads. The hole configuration I have should work for most if not all standard electrical outlet boxes if there is one already in the wall. If not, it can just be screwed into the drywall.
I recommend printing it in the orientation that I have in the file. It will seem like it needs support but my Prusa was able to bridge the first few layers without any support. The reason I did this was becuase I wanted the “top layer look” on the surface that was going to be visible. I did not like the textured or PEI bed look when I had the top surface on the build platform.