2.5″ Cinewhoop (20x20 Stack)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project was actually just for fun....but it ended up flying (unexpectedly) very well.
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 441
- Wydruki
- 2
- Wyświetlenia
- 2536
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This project was actually just for fun....but it ended up flying (unexpectedly) very well. All you need additionally are 14 pieces of m3 18mm nylon standoffs.
My Configuration:
- Stack (20x20): Mamba F405 MINI MK2 + F30A, AKK FX3-Ultimate + Caddx Ant
- Motors: Happymodel EX1204 5000KV + HQProp T63mmX8
- Receiver: Ghost Atto + qT
- Battery: GNB 3S 650mAh HV + 10x150mm Strap, ~7:30min (BlueJay @96khz)
- Weight: 136g (dry), 182g (takeoff)
Note: the antenna mount has a click-in mechanism for a 2xLED+Buzzer-module such as the "HGLRC WS2812 Colorful LED&5V Active Alarm Buzzer"
Update: GoPro Mount added
Tinkercad Project: https://www.tinkercad.com/things/hwnm72HH17w
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
Frame: 15% (Grid), Duct: 6% (Grid)
Filament: UNKNOWN BLACK, WHITE PETG, ABS, PC
Notes:
Frame
Wall-Lines: 2,
Top/Bottom-Layers: 3
Infill: 15% (Grid)
Duct
Wall-Lines: 1
Top/Bottom-Layers: 2
Infill: 6% (Grid)
Category: R/C Vehicles