Support Ukraine (and your phone)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another phone support, with Ukraine's trizub engraved.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 135
- Wydruki
- 1
- Wyświetlenia
- 525
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
If you're going with the STL file, supports should be added for the half-circle USB connector « emplacement ».
Printed at 0.3 mm layer height.
The 3MF and GCODE files already contain the needed supports and a color change at half-height (model is printed sideways, so half-width in real life).
Hexes at the back should be big enough to allow USB C connectors to go through. If I'm mistaken (despite several tests), just tell me.
Please take note the the trizub, in the first photo, has been painted. You will not get a “different color" trizub, only a recessed one (as in other photos), by simply printing the model.