Fitted Hat Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall-mount hat hook that uses 3M Command Strips to mount on the wall.
- Ocena
- 4,778 / 5
- Polubienia
- 45
- Pobrania
- 386
- Wydruki
- 9
- Wyświetlenia
- 1255
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is a hook to hold a single hat on the wall. It was designed with fitted baseball caps in mind, but it's equally useful for adjustable caps, beanies and other hats. Plus, anything else really.
It gets stuck to the wall with a single 3M Command Strip on the back, and it is virtually invisible when a hat is hanging on it. The tab on the command strip does stick down a bit below the bottom, but it's hidden when a hat is on it. Or you can trim the tab down a bit if it really bothers you.
Update 5/21/2023 - I edited the model a tiny bit to add a cutout at the bottom that allows the command strip tab through. This allows the hook to sit flush to the wall. I recommend a small support on the bottom corner of the cutout to keep it nice. Download the v2.5 model for the version with the bottom cut out.