1 / 6
Slider for 3030 profile (with M6 nut) — zdjęcie 1
1 / 6

Slider for 3030 profile (with M6 nut)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I needed a glider for my home-made workbench.

Ocena
0 / 5
Polubienia
24
Pobrania
190
Wydruki
0
Wyświetlenia
1175
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I needed a glider for my home-made workbench. It is used to attach an accessory to the 3030 profiles on the sides of the bench.

The washer is used to create a flat level. see pics.
Also added one with supports. The GCode is for this one.

Print instructions

Printed on Original Prusa MK3.
I used supports and brim.
Printed with 50% gyroid infill.
Printed in PETG with 0.2mm layer hight.

Tagi