Air Assist Ortur Laser Master 2 Pro S2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since I could not find a suitable AirAssist system for my Ortur Laser Master 2 Pro S2, I constructed one myself.
- Ocena
- 4,667 / 5
- Polubienia
- 29
- Pobrania
- 314
- Wydruki
- 3
- Wyświetlenia
- 1747
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Since I could not find a suitable AirAssist system for my Ortur Laser Master 2 Pro S2, I constructed one myself.
My laser module LU2-4-SF is 40x40 square, but it has an additional bulge to guide it in Z-axis.
The AirAssist consists of two parts:
1. holder for the nozzle
2. guide for the air hose
As nozzle I use a 3D printer nozzle with 1.0 mm hole (tip 8 mm, thread 5 mm). With this nozzle the airflow aims exactly at the focus of the laser beam.
The original Ortur laser shield is not obstructed and can be used as intended.
As pump I use a pond pump with an air flow of 16l/min. The air hose has a diameter of 4/6 mm (inside/outside).
To ensure that the air hose is well guided, I have partially guided it through the cable chain of the Ortur and constructed an additional cable support.