Air Assist Ortur Laser Master 2 Pro S2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Since I could not find a suitable AirAssist system for my Ortur Laser Master 2 Pro S2, I constructed one myself.
- Rating
- 4.667 / 5
- Likes
- 29
- Downloads
- 315
- Makes
- 3
- Views
- 1,751
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Since I could not find a suitable AirAssist system for my Ortur Laser Master 2 Pro S2, I constructed one myself.
My laser module LU2-4-SF is 40x40 square, but it has an additional bulge to guide it in Z-axis.
The AirAssist consists of two parts:
1. holder for the nozzle
2. guide for the air hose
As nozzle I use a 3D printer nozzle with 1.0 mm hole (tip 8 mm, thread 5 mm). With this nozzle the airflow aims exactly at the focus of the laser beam.
The original Ortur laser shield is not obstructed and can be used as intended.
As pump I use a pond pump with an air flow of 16l/min. The air hose has a diameter of 4/6 mm (inside/outside).
To ensure that the air hose is well guided, I have partially guided it through the cable chain of the Ortur and constructed an additional cable support.