IKEA Kallax - height adjustable feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just some small feet for Kallax to be mounted with the long screws.
- Ocena
- 4 / 5
- Polubienia
- 43
- Pobrania
- 240
- Wydruki
- 1
- Wyświetlenia
- 1739
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Update: added a little ringidily as an additional mounting point on the outside to move the mounted foot away from the kallax corner. Now you can get it against the wall, even with skirting. If you do not need it, you can still use the center hole und make the ringidily face inwards.
I had to raise my kallax a bit to make the attached tabletop fit over the radiator at their new place. As they might turn around themselves instead of screwing in and out when they are under load, you might also glue them down or just lift the corner of your shelf for adjustment.
Height: 4 cm - 5.5 cm (6cm possible but stability might be low on heavy loads)