BM800 26mm Capsule Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plastic holder for upgraded 26mm capsule for the popular BM800 microphone
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For anyone who bought a 26mm condenser capsule for BM800 and doesn't want to modify the standard holder. It is a 3 piece design, so it's not hard to print and should be sturdy enough even without glue.
Print instructions: All parts are oriented as they should be in the 3mf files. 2-3 perimeters will be fine. Choose material you see fit, PLA will probably result in the best appearance.
Assembly: After you print the pieces (easily printed in one go), just align the round capsule part and the part with screwholes in the orientation you see in the pictures and put the pin through the holes. It should be very snug and there should be no play in the final assembly. If there is any play and you feel like it could come apart, you can glue the parts together with superglue or something like that.
At this moment, there are 2 versions available, with BM800 text and without it. I can try to create versions for other capsule diameters if requested.