1 / 4
SHURE 1/2 Wave Omni Receiver Antenna clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an antenna clip for a 1/2 wave omni receiver antenna clip. U can use it on a traverse or microphone standard.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 887
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (32)Powiązane
This is an antenna clip for a 1/2 wave omni receiver antenna clip. U can use it on a traverse or microphone standard.
This design is printable without support. I didn't design the thread in the object, feel free to do it. I heated one of my bolts to melt the thread in my clip.
This is my second design and works fine for me. Printed with PLA on the Prusa MINI with 20%fill.
Designed by [M]EA MANUFACTURING