Improved Spool Retaining Nut for robkar's PSMSHWSPBB&TL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Neither of the 2 original nut designs for robkar's spool holder would work with the very reasonably-priced Hatchbox…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Neither of the 2 original nut designs for robkar's spool holder would work with the very reasonably-priced Hatchbox 1kg filament spools or 0.5kg 3D Solutech spools due to their small spool hole size. In fact, the smallest size supported by the "small" nut design by rokbar is identical to that of the larger default nut.
This improved spool retaining nut design will work with any size spool center that will fit on the holder (approx. 25mm - 68mm). Multiple retaining nuts are not required. The center of the nut is also open to allow visual feedback of where the spindle center is while tightening.
Enjoy !
-=dave
Print instructions
Category: 3D Printer Accessories Summary
Neither of the 2 original nut designs for robkar's spool holder would work with the very reasonably-priced Hatchbox 1kg filament spools or 0.5kg 3D Solutech spools due to their small spool hole size. In fact, the smallest size supported by the "small" nut design by rokbar is identical to that of the larger default nut.
This improved spool retaining nut design will work with any size spool center that will fit on the holder (approx. 25mm - 68mm). Multiple retaining nuts are not required. The center of the nut is also open to allow visual feedback of where the spindle center is while tightening.
Enjoy !
-=dave
Print Settings
Printer Brand: Printrbot
Printer: Simple White
Rafts: Doesn't Matter
Supports: No
Resolution: 200 microns
Infill: 3% Triangular in Simplify3D