1 / 1
Wet filament in comparison to dry filament - TPU (flexible) — zdjęcie 1

Wet filament in comparison to dry filament - TPU (flexible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I bought TPU of another vendor and first results were worse. After drying the filament the results are as expected.

Ocena
5 / 5
Polubienia
22
Pobrania
70
Wydruki
1
Wyświetlenia
2769
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial

I bought Extrudr semisoft filament and started the first print after putting the filament from original package into my filament box.

The result of the printed part was worse. I repeated the same print with a different flexible filament of another vendor and the result was fine. 

Based on the result I came to the conclusion, the filament must be wet although I took it from the original package.

 

Drying of filament

I dried the filament in a usual baking oven at a temperature of °60C +/-3°C and a duration of 3 hours. To avoid temperatures over 65°C, I measured the temperature in the oven by a external thermometer.

 

Printing setup

 

Results

After drying the filament, the printed part look as expected. To avoid trouble by printing the overhang, I have added cooling (50%) and have reduced nozzle temperature from 240°C to 225°C.
 

Tagi