Wet filament in comparison to dry filament - TPU (flexible)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I bought TPU of another vendor and first results were worse. After drying the filament the results are as expected.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 70
- Makes
- 1
- Views
- 2,769
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
I bought Extrudr semisoft filament and started the first print after putting the filament from original package into my filament box.
The result of the printed part was worse. I repeated the same print with a different flexible filament of another vendor and the result was fine.
Based on the result I came to the conclusion, the filament must be wet although I took it from the original package.
Drying of filament
I dried the filament in a usual baking oven at a temperature of °60C +/-3°C and a duration of 3 hours. To avoid temperatures over 65°C, I measured the temperature in the oven by a external thermometer.
Printing setup

Results
After drying the filament, the printed part look as expected. To avoid trouble by printing the overhang, I have added cooling (50%) and have reduced nozzle temperature from 240°C to 225°C.