IKEA Billy Bookcase Joiner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connect two Billy bookcases side-by-side at the top, out of view.
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 328
- Wydruki
- 3
- Wyświetlenia
- 3996
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I put four of IKEA's “Billy” bookshelves in a room and found them to stand slightly unevenly, probably due to the uneven floor. Like every problem I encounter nowadays, there was a way to 3D print a solution! This little bracket did the trick. Find four little screws and you're in business. I recommend printing this at 100% infill, but I did my example at 10% and it felt surprisingly strong even when screwed in place. I used PLA and have no concerns about warping since the room is almost always pretty cool.
If you want a version of this that's longer than the 8cm or whatever I ended up making this, you can simply put two into your slicer and line them up perfectly end-to-end to produce one that's double the length.