1 / 4
Small Parts Wash Container for ultra sonic cleaners — zdjęcie 1
1 / 4

Small Parts Wash Container for ultra sonic cleaners

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a simple small parts wash container for ultra sonic cleaners that has a locking hinged lid. NOT FRICTION FIT.

Ocena
5 / 5
Polubienia
27
Pobrania
117
Wydruki
1
Wyświetlenia
576
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

This is a small parts container for use in ultra sonic cleaners. I tested a friction fit lid design but the PLA plastic goes soft due to the heat in the ultrasonic cleaner and fails to remain closed. So now I have designed a container with a locking hinged lid that you can just flick open with your thumb. Now tried and very well tested in 65 deg C cleaning fluid. The hinge pin is 1/16th or 1.6mm braising rod. Clear the holes out with a 1/16th drill bit before pushing the hinge pin through. Super glue the hinge pin in place with a dab on both sides and your done. Strangely satisfying flicking the lid with your thumb over and over again. Mmmmm! 

 

Tagi