Small Parts Wash Container for ultra sonic cleaners
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple small parts wash container for ultra sonic cleaners that has a locking hinged lid. NOT FRICTION FIT.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 117
- Makes
- 1
- Views
- 576
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a small parts container for use in ultra sonic cleaners. I tested a friction fit lid design but the PLA plastic goes soft due to the heat in the ultrasonic cleaner and fails to remain closed. So now I have designed a container with a locking hinged lid that you can just flick open with your thumb. Now tried and very well tested in 65 deg C cleaning fluid. The hinge pin is 1/16th or 1.6mm braising rod. Clear the holes out with a 1/16th drill bit before pushing the hinge pin through. Super glue the hinge pin in place with a dab on both sides and your done. Strangely satisfying flicking the lid with your thumb over and over again. Mmmmm!