Merchant of Venus 2nd Edition Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organizer for Merchant of Venus 2nd Edition game components.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 174
- Wydruki
- 0
- Wyświetlenia
- 846
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by the Esoteric Order of Gamers foamcore insert which I had built and used for a long time. I took the culture storage & display trays as the starting point and built a 3D printed organizer around that.
The culture trays leave all those bits in an organized display that comes out of the box and sets next to the board in seconds. I have spaces for 6x3 magnets to hold them together during play. They should just press fit in with no glue needed.
I tried to keep the Standard Rules bits within one tray so you can easily leave that in the box if playing Classic Rules.
Printing
This is a big print project and will take a bunch of plastic and time. Plan on getting a full kg spool just for this project. Some of the parts--particularly the culture trays--are big pieces. I used my 250 Voron Trident to print, and that's the minimum bed size for the bigger parts.
I printed with 18% Gyroid infill to make sure the bases of the wells laid down correctly. Then 3 walls and bottom layers, 4-5 top layers for a good finish.