Merchant of Venus 2nd Edition Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Organizer for Merchant of Venus 2nd Edition game components.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 174
- Makes
- 0
- Views
- 846
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
Inspired by the Esoteric Order of Gamers foamcore insert which I had built and used for a long time. I took the culture storage & display trays as the starting point and built a 3D printed organizer around that.
The culture trays leave all those bits in an organized display that comes out of the box and sets next to the board in seconds. I have spaces for 6x3 magnets to hold them together during play. They should just press fit in with no glue needed.
I tried to keep the Standard Rules bits within one tray so you can easily leave that in the box if playing Classic Rules.
Printing
This is a big print project and will take a bunch of plastic and time. Plan on getting a full kg spool just for this project. Some of the parts--particularly the culture trays--are big pieces. I used my 250 Voron Trident to print, and that's the minimum bed size for the bigger parts.
I printed with 18% Gyroid infill to make sure the bases of the wells laid down correctly. Then 3 walls and bottom layers, 4-5 top layers for a good finish.