Figurative Christmas Tree for ornaments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalistic christmas tree to place your christmas grails and give ambiance
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 583
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Wanted to showcase these fantastic christmas ornaments that some of you might already have, and I came up with this design.
Info:
Would work great for a shop stand on christmas stuff, this is why I partly built it.
The reason is split in 6 parts is because I wanted to minimize the amount of green filament and to make easier sticking the LED.
Every section has a hole for wire management on the back left corner.
Front parts have a lip so that you can conceal the LED and protect retinas.
Materials:
- Screw-in hooks
or anything that allows you to grab the ornaments if you want to hang them
- All 6 parts printed
- Cyanoacrylate
- COB LED I used this
- LED power supply, in my case 12v
- [Optional] Female power plug connector like this
- [Optional] Dimmer like this
Instructions:
- Print all the parts
- Add hooks if you want to hang the figures
- Cut the led to the back side of the front part
- Solder the wires to the sections of LED's
- Stick the sections of LED's to the front parts and use the pass the wire through the hole of the back parts
- Glue the front and back parts together
- Attach the female power plug to the end of the wires, put the 3 wires on 1 plug.
- Light it up and put the ornaments
Additional notes
[To-do] Make more room on the upper side and probably make every section a bit taller.
Shameless Plug
I sell the ornaments on Etsy, there are many variations available! Ready to ship fast!