TAZ 6 Tool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool holder for stock TAZ 6.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 640
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Tool holder for stock TAZ 6. No modification or tools required for installation; arm for added security.Now with SD card slots, small cutout for pens or screwdrivers, and hook for holding light objects!
Built-in supports were tested at .4 layer height.
However adding custom supports in Cura is very easy. Use the provided Custom Cube, and illustration in the image gallery to create a good support foundation. I used a 20% connected Zig Zag support, with interface. Be sure to set your Support settings first, then disable supports; your custom supports will apply what you've set. Any Q's on how to use custom supports, feel free to leave a comment.